Not just a Binding.

STANDARD FEATURES

The following features are standard on every single Burton binding:
LIFETIME WARRANTY on ALL Baseplates 
LIFETIME WARRANTY on ALL Flex Sliders
Anatomical Left and Right Baseplates
Engineered Composite Baseplates and Hi-Backs
Progressive Flexing Hi-Backs
Hi-Back Rotation
Forward Lean Adjustment
Telescoping Straps (Adjust the fit in seconds)

RE:FLEX™ BINDINGS 
Re:Flex™ offers more flex, feel, and cushioning than traditional disc bindings, in a package that’s universally compatible with all current mounting systems, including 4x4, 3D® and The Channel™. The minimized, cored baseplate with Living Hinge™ disc not only reduces the weight and footprint of the binding, but also bends freely for a more natural feel that unlocks the board’s true flex. 

EST® BINDINGS
Burton’s exclusive EST® bindings offer the ultimate in flex, feel, and adjustability, with the option to customize performance by choosing between various BED cushioning technologies. Get endless stance options, a truer flex from your board, and more cushioning, feel, and control than ever before. Compatible exclusively with Burton boards featuring The Channel™. 

BASEPLATES

Dependable and rugged, we’re so confident in our baseplates that we back them up with a LIFETIME WARRANTY. You break it, we replace it…FOR LIFE!

LIFETIME BASEPLATE WARRANTY
Burton will replace any baseplate for the lifetime of the original owner (with proof of purchase) against manufacturer's defects. Return defective product to the store where you bought it or call Burton Rider Service at 1-800-881-3138. All warranty claims should be accompanied by an explanation and receipt.

CONSTRUCTIONS:

EST® BASEPLATE CONSTRUCTION
By removing the materials from beneath your feet and replacing them with cushioning, we are able to drastically reduce weight and explore entirely new designs. With EST®, the possibilities for flex and feel are infinite, and so are the stance options. Get it all without ever sacrificing the edge-to-edge power you know and trust.

THE HINGE [EXCLUSIVE TO EST® BASEPLATES]
This Burton-exclusive technology flexes dynamically with your leg for increased foot roll, less fatigue, and easier ollies. Featured on the Diode EST®, Genesis EST, Malavita EST, and Cartel EST.

RE:FLEX™ BASEPLATE CONSTRUCTION
With a minimized, cored baseplate and Living Hinge™ disc, Re:Flex™ dramatically improves board flex and feel, and reduces weight. 

SINGLE-COMPONENT BASEPLATE CONSTRUCTION
One material throughout creates consistent response and feel for all-terrain domination.

MATERIALS:

50:50 CARBON FIBER/NYLON COMPOSITE
Hyper lightweight and responsive

28% CARBON FIBER/NYLON COMPOSITE
Supreme reactivity, weightlessness, and strength

45% SHORT-GLASS/NYLON COMPOSITE
Carbon performance without killing your credit card

30% SHORT-GLASS/NYLON COMPOSITE
Slightly more responsive than the Park Blend, yet still plenty playful

PARK BLEND 18% SHORT-GLASS/NYLON COMPOSITE
Park-engineered blend features ramped up strength in a soft-flexing package

LIGHTWEIGHT, BOMB-PROOF POLYCARBONATE
Buttery and playful for laid-back, relaxed cruising

40% LONG-GLASS POLYPROPYLENE
A baseline blend of strength and versatile flexibility

HI-BACKS

Choose between a variety of flex, shape, and adjustability options to suit your style of riding.

CANTED HI-BACK DESIGN
Your legs don’t go straight up, and neither should your hi-backs. This ergonomic design follows the natural contours of your left and right legs to maximize control and comfort.

WINGED HI-BACK
Wraps around the outside of your boot and boosts lateral support for increased leverage and control when pressing, buttering, and spinning. 

LIVING HINGE™ HI-BACK
This exclusive technology eliminates hardware and weight, and allows you to adjust your Forward Lean and hi-back rotation independently. 

KICKBACK HAMMOCK
A lighter weight upgrade to the Heel Hammock, this two-piece, heel-hugging hi-back is literally suspension in a hi-back. Dynamic interaction between an internal spring and rubber over-molded hammock results in increased response and reduced vibration while your heel is cradled in complete suspension. Featured on the Genesis/EST®, Genesis X/EST Holiday model, and Escapade/EST.

HEEL HAMMOCK
This reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightning fast response out of turns with your heel cradled in complete suspension. Featured on the Malavita/EST®, Stay Calm/EST, and Lexa/EST.

FREEDBACK HAMMOCK INSERT
This minimal hi-back replacement puts the heel hugging power of our Heel Hammock into your binding while eliminating the hi-back from the equation altogether. Feel the tweakable and surfy freedom of no hi-back without sacrificing your connection to the board. Available as an accessory and compatible with all men’s and women’s Burton bindings. 

ZERO FORWARD LEAN HI-BACK
Riders who prefer a more playful and relaxed feel will dig the Zero Forward Lean design on select hi-backs. As always, you can still choose to crank ‘em forward for quicker control when carving or climbing icy pipe walls.  

SINGLE-COMPONENT CONSTRUCTION
The simplicity of a one-piece hi-back means immediate response. Using our book of material secrets, we can manipulate the overall flex profile—from buttery to responsive.   

PROGRESSIVE FLEX CONSTRUCTION 
We formulate our hi-back designs and materials to transition from a rigid and responsive lower to a forgiving upper for powerful response that works with you, not against you. Thinner cross-sections in the ears allow for medial and lateral flex that mirrors your every move.

TRUE OTT HI-BACK PADDING
Wrapping the upper portion of the hi-back with padding eliminates pesky pressure points.

STRAPS & BUCKLES

HAMMOCKSTRAP
Reactstrap roots in a stitch-less construction for ultra-response with minimal materials. The addition of a nylon cross spine equals a more direct connection with the board.

NEW ASYM HAMMOCKSTRAP
Featuring the same minimal and seamlessly comfortable design as the Hammockstrap, this new asymmetrical pad and spine shape wraps the boot in response. Flip the straps for increased freedom, or run stock for power and support.  Exclusive to the Malavita/EST, Lexa/EST, and NEW X-Base/EST.

DOUBLE TAKE BUCKLES
Be the first to drop in with the rapid ratcheting of Burton’s Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tightness. The result: vastly improved strength, speed, and ease-of-use.

FLEX SLIDER
Our Flex Slider makes strapping in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to science of forced molecular alignment, the Flex Slider is also stronger, making it worthy of our LIFETIME WARRANTY.

NEW SUPER GRIP CAPSTRAP 
This new minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort. Featured on the Diode/EST®, Genesis/EST, Malavita/EST, Escapade/EST, and Lexa/EST.

LIGHTWEIGHT GETTAGRIP CAPSTRAP
This design replaces the grippy rubber of previous designs with lightweight EVA for cush comfort that wraps response around the toe of the boot. Exclusive to the NEW X-Base/EST.

GETTAGRIP CAPSTRAP
Grippy rubber wraps response around the toe of the boot for a locked in fit and pressure-free comfort. 

SMACKDOWN TOE STRAP
It’s simple—the Smackdown toe strap saves you time. Set the strap size to your boot once, then smack the lever down to shred or flip up for easy release. You’re in and out in half the time as a traditional strap-in setup. Offered as an accessory, it’s compatible with all Burton bindings except those featuring The Hinge EST baseplate.

SMACK-IT RATCHET
We sweat the small stuff. Like the Grom binding’s oversized, mitt-friendly Smack-It Ratchet buckle design. Working with our own kids, we went back to the drawing board to give the littlest riders a binding they can enter, exit, and adjust all by themselves.

SMOOTH GLIDE™ BUCKLES 
Feel how easy buckling in can be with the most reliable buckles in the industry. Available in two versions on our men’s and women’s bindings, choose single-component for all day buckling pleasure; or the upgraded performance of our dual-component design which offers a polycarbonate barrel for improved ratchet tongue life. All buckles feature aluminum levers and steel bases for strength you can trust. 

ANKLE STRAPS:

HAMMOCKSTRAP™
Stitchless, Minimized Injected Design
Ultra-Responsive 3D® Curved, Triple Axis Spine
Ultra-Light Engineered Padding Remains Soft in Cold Temps

ASYM HAMMOCKSTRAP
Stitchless, Minimized Injected Design
Ultra-Responsive 3D® Curved, Triple Axis Spine
Ultra-Light Engineered Padding Remains Soft in Cold Temps
Laterally Supportive Asym Shape
Reversible Shape: Choose Between Power or Mobility

REACTSTRAP™
Minimized Construction
3D® Curved, Triple Axis Spine
Ultra-Responsive Wrap Conforms to Any Boot
Available in Multiple Patterns and Constructions 

TWEAKSTRAP
Unique Asymmetrical Design
3D® Curved, Triple Axis Spine
Minimized Lightweight Construction
Reversible Shape: Choose Between Power or Mobility 

ASYM REACTSTRAP™
Minimized Asym Construction
3D® Curved, Triple Axis Spine
Laterally Supportive Asym Shape
Ultra-Responsive Wrap Conforms to Any Boot
Reversible Shape: Choose Between Power or Mobility

LUSHSTRAP™
Lushstrap Construction
3D® Curved, Triple Axis Spine
Concealed EVA Padding

ASYM LUSHSTRAP™
Lushstrap Construction
3D® Curved, Triple Axis Spine
Concealed EVA Padding
Reversible Shape: Choose Between Power or Mobility

ASYM LUXSTRAP™
Luxstrap Construction
3D® Curved, Triple Axis Spine
EVA Padding
Reversible Shape: Choose Between Power or Mobility

ONESTRAP® 3.0
For the Groms
Easy to Use with Little Paws
Ergo Shaped Easy Entry Ratchet Tongue
Updated Size and Shape

TOE STRAPS:

NEW SUPER GRIP CAPSTRAP
Ultra-Minimized and Fully Injected, Over-Molded Design
Ultra-Durable Glue-Less, Stitch-Less, and PU-Free Construction
3D® Curved, Triple Axis Spine
True Wrap Toe Window
Conformable as Capstrap or Toe Strap

LIGHTWEIGHT GETTAGRIP CAPSTRAP™
Super Lightweight EVA Grip
3D® Curved, Triple Axis Spine
Ultra-Minimized Capstrap™ Construction with True Wrap Toe Window
Conformable as Capstrap or Toe Strap

GETTAGRIP CAPSTRAP™
Grip Fit Rubber
3D® Curved, Triple Axis Spine
Ultra-Minimized Capstrap™ Construction with True Wrap Toe Window
Conformable as Capstrap or Toe Strap

PRIMO CAPSTRAP™
3D® Curved, Triple Axis Spine
Grip Fit

ADAPTASTRAP
Conformable as Capstrap™ or Toe Strap
Stretch Lycra® True Wrap Toe Window

EST CUSHIONING

AUTOCANT SENSORYBED™
Dual-density EVA automatically settles your boot into a natural position regardless of stance width or angles for improved comfort, reduced fatigue, and more direct board control. 

SENSORYBED™ 
An elevated realm of cushioning, board feel, and extra-sensory control in a versatile, shred-everything package. 

SHREDBED™ 2.0 
Minimized EVA cushioning with the added edge control of an optional Gas Pedal for accelerated handling. Featured on the Custom EST® and Stiletto EST.

CANTBED™ 2.0
Jake’s BED of choice, its 3.5 degrees of inward tilting mirrors your lower body’s natural alignment when standing on your snowboard. This lets you ride in a more relaxed position, especially when rocking a wider stance. Available as a men’s binding accessory.

PODBED™ 
Strategically placed EVA padding provides cushioning in common pressure points while a clear topsheet material evenly distributes a rider’s weight. An evolved indicator allows for more precise stance adjustment and the glue-less design is friendlier on the environment. Featured exclusively on the Escapade EST®.

NEW SPRINGBED
Like having a trampoline underfoot, the NEW SpringBED suspends the rider off of the board for amplified cushioning and rebound that is unlike anything else in snowboarding. A new stance indicator enables precise setup. Available exclusively on the Diode EST.   

RE:FLEX CUSHIONING

AUTOCANT FULLBED
Dual-density EVA automatically settles your boot into a natural position regardless of stance width or angles for improved comfort, reduced fatigue, and more direct board control. 

FULLBED CUSHIONING
FullBED cushioning offers full underfoot cushioning that maximizes comfort while minimizing fatigue. Anchored to the baseplate, its stealth trap door design makes it easy to access the mounting hardware. 

B3 GEL 
The same cushioning found in our high-end boots for ultimate dampening that’s formulated to withstand repeated impacts without breaking down or hardening up in cold temps. 

INCREASED UNDER-BASEPLATE DAMPENING PAD
Eats up vibrations and impacts in a design that expands cushioning while reducing the footprint of the binding on the board for increased flex and feel. Found on the Cartel™, Stay Calm, Deathfalcon, Mission™, Escapade™, Lexa™, Sidekick, and Scribe.

Want to know everything about snowboards as well?

Read all about the Burton boots for snowboarders